I don't make pots specifically for ikebana, but I suppose some of them might be serviceable for flower arranging and some of them might not. I spoke to quite a few people who made comments about my pots such as "That's a nice vase but it's too showy. It would compete too much with my arrangement" or "I need the bottom of the bowl to be flat or for the opening to be larger for my kenzan (frog)" or "This vase is nice, but it's too light at the bottom/too narrow at the top" and so forth. Speaking of needing heavy vases, I spoke with one woman who liked the look of my pots but felt they needed more heft. She turned around and grabbed another potter's vase and said, "Oh, I like this one. I don't like the form that much and I don't care for the glaze, but feel how heavy it is!" And then she handed it to me. I had to admit it was plenty heavy and after putting a kenzan and water in the bottom I imagined an earthquake couldn't move it. She ended up buying it and I helped her wrap it up in newspaper. Anyway, it was a learning experience for me in many ways!
Each year the local Ikebana International chapter puts on a display at the Honolulu Museum of Art. The sogetsu and ohara schools have displays at the museum on alternating years. This year it was the ohara school's turn. The museum also sponsors an ikebana container sale and I participated last year and this year. Last year's sale was good but this year's sale was fantastic. Eight potters were invited to participate and all of us did well. One of the highlights for me was meeting the head of the Hawaii ohara school, Elaine Arita, who's a well-known ikebana sensei. She bought several of my pots over the course of three days. She also took me into the display, showed me her arrangement (the largest and most impressive in the show), and taught me a few things about the ohara style of ikebana. I don't make pots specifically for ikebana, but I suppose some of them might be serviceable for flower arranging and some of them might not. I spoke to quite a few people who made comments about my pots such as "That's a nice vase but it's too showy. It would compete too much with my arrangement" or "I need the bottom of the bowl to be flat or for the opening to be larger for my kenzan (frog)" or "This vase is nice, but it's too light at the bottom/too narrow at the top" and so forth. Speaking of needing heavy vases, I spoke with one woman who liked the look of my pots but felt they needed more heft. She turned around and grabbed another potter's vase and said, "Oh, I like this one. I don't like the form that much and I don't care for the glaze, but feel how heavy it is!" And then she handed it to me. I had to admit it was plenty heavy and after putting a kenzan and water in the bottom I imagined an earthquake couldn't move it. She ended up buying it and I helped her wrap it up in newspaper. Anyway, it was a learning experience for me in many ways!
0 Comments
Two major ceramics auctions are coming up in the next few weeks. The first is the ceramics and glass auction at Cowan's Auctions. The number of pieces is small but there are several gems. The date of the auction is May 28th, and you can find the auction catalog at www.cowanauctions.com. The second auction is June 1 through 4 at maak contemporary ceramics in London. The selection of pieces is large and outstanding, and you can find the catalog at www.maaklondon.com. Take a look and be inspired!
On Monday, May 18, I attended a workshop with Charlie and Linda Riggs. They're guest artists and jurors for Hawaii Craftsmen's Raku Ho'olaule'a, an annual event held on the North Shore of Oahu. For three days, potters camp at Camp Mokule'ia and try their hand at all sorts of alternative firing techniques, but especially raku and pit firing. Unfortunately I haven't been able to participate in past years and it doesn't look like I'll be able to do it this year because of scheduling conflicts. I have a juried show with the Windward Artists Guild ending Saturday and another that's starting tomorrow (Thursday) which is an ikebana show and pot sale at the Honolulu Museum of Art. Nothing happens and then everything happens. Anyway, Charlie and Linda held a workshop on Monday evening at the University of Hawaii Ceramics Lab that I was able to attend. I learned alot, especially from the handouts they gave us. I won't give those to you, but I'll just say they include terra sig recipes (including colored sig), how to do saggar firing in a raku kiln, how to use ferric chloride, how to do naked raku (including recipes for the slip resist), how to use horse hair, and general information about raku including choosing a clay body. I'm sure if you attend one of their workshops, you'll get the same information.
What I will share is stuff they said in the course of their presentation that I thought was interesting. First, Charlie apparently likes to use as white a clay body as he can such as BMix with Grog, but he likes to put terra sig on everything whether he's pit firing or doing raku. According to him, the terra sig absorbs carbon and color better. If I understood him correctly, when he uses a groggy clay like Soldate 60, he'll spray a porcelain slip on the pot before putting on terra sig to make the pot smoother. Second, Charlie uses XX Saggar ball clay or OM 4 ball clay when making terra sig. He said that Tennessee or Kentucky ball clay can be used if you want a whiter terra sig, but he likes using XX Saggar or OM 4 since it results in a warmer linen color. Third, he uses a Mayco #8 fan brush to apply terra sig to pots since it's the best thing he's found so far. Fourth, he uses a microfiber cloth to buff the terra sig because it's the best thing he's used to get a nice sheen on the pot. Fifth, if you add a colorant to terra sig like a Mason stain, it's important to pass the sig and colorant through a 100 mesh screen. Better yet, put it through a ball mill before using since the stain is so much coarser than the sig. Sixth, he made some interesting observations about using steel wool in saggar and pit firings. For instance, he suggests using medium coarse steel wool and not the finest grade but didn't say why. He also said that with steel wool, "less is more." In other words, don't use too much. Seventh, he uses two large bisqued bowls of the same size as saggars. Inside he puts stuff like sawdust, copper carbonate, salt, and any other colorant he wants to use. He puts a piece of kiln shelf on the bottom so the pot doesn't touch things like the salt and copper carbonate. He doesn't keep the saggar tightly sealed, however, or the pot would turn out totally black. Instead you uses very thin pieces of bisqued clay (pieces that fall off from naked raku are perfect) or small wads of steel wool to make a very thin opening on one side of the bowls. This allows some oxidation to take place within the saggar. If the saggar didn't oxidize a little, the pot would emerge totally black. There must be some oxidation in the saggar for carbon to burn off and for color to become visible. He makes a small slit on one side only to add some variety to the surface effects. Eighth, Charlie demonstrated how he bellies out a pot. He uses a torch to dry out the surface of the clay a little so it doesn't collapse as he stretches it out. He mentioned that he uses masonite bats when using this technique since a plastic bat would warp slightly if he was using a torch near the bottom of the pot. He also mentioned that he uses wood ribs rather than plastic to stretch and shape the clay since there is less surface tension with wood than with plastic and less chance the rib will stick to the clay. Finally, he showed us how he uses a rib to make undulating marks on the middle of a pot once he's stretched it out. He said that first the wall of the pot has to be thin enough for him to use this technique. After it's stretched out, he dries it pretty well with a torch or lets it sit for awhile. Then he uses the rounded end of a wooden rib to press in the clay while the pot slowly revolves on the wheel. Afterward he uses a very thin sponge like the ones made by Mudtool in order to push out those areas that are standing in relief. He doesn't use just his fingers since he feels they're too thin and put unwanted marks in the clay. Well, that's most of what I got in my notes. If the Riggs are coming to your area, I highly recommend taking a workshop with them. They're very knowledgeable, very personable, and lots of fun. |
AuthorI hope this blog will be encouraging to potters, especially beginning potters, and a source of helpful information and comment. Archives
November 2021
Categories
All
|